Installation Guides

Diopter Shroud

  1. Orient shroud as desired and slide onto the magnification ring so that the shroud’s internal ribs align within the ring’s grooves as shown.

  2. Use a 3/32” bit to tighten the screw until the gap closes as shown.

  3. Turn the screw an additional 1/2 turn clockwise.

 

NF Turret Grip

  1. Orient the knob extension as desired onto the elevation turret.

  2. Use a 5/64” bit to tighten the screw until the gap is closed (as pictured).

  3. Turn the screw an additional 1/4 to 1/2 turn clockwise.

 

NGAL Enhanced Knob

  1. Install a pressure pad. It must be oriented with the cord at the 9, 6, or 3 o’clock position.

  2. Turn the illuminator knob counterclockwise until it stops.

  3. Position knob extension over the illuminator knob as shown (ensure it is as far counter clockwise as possible).

  4. Use a 5/64” bit to tighten the screw until the gap is closed (as pictured).

  5. Turn the screw an additional 1/8 to 1/4 turn clockwise.